Experiment 12

Summary For this lab my partners and I were asked to defecate stand up waves and mould the oftenness of the waves. First we reconciled the weight and continuance of the quarter. We therefore link up the drawstring to a string vibrator and hung a certain view at the end of the string to produce a stand wave with one node. We whence(prenominal) added weight to create up to 6 remindful nodes. later this, for the next try out we were asked to regain the wave lengths ? of each redolent(p) node. The formula for wavelength is ?=C/v. We then compared (? vs. ?FT). We then found the careen, y-intercept, and correlativity coefficient. After finding these things we then were asked to count on % misplay between the observational frequency and the known frequency. My partners and I then computed tension and voltaic pile needed to produce the arm printing remindful mode. Lastly we used the analog copulation to determine the push-down storage needed to produce the tenth reverberative mode. Conclusion From this experiment I learned a push-down store about standing waves. This experiment allowed me to visualize the waves and the resonant nodes. The length of the string was 1.08m and the pile of the string was .000316kg.

The mass needed to go one resonant node was .15kg, two resonant nodes was .0075kg, trio resonant nodes was .04kg, foursome resonant nodes was .015kg, and five resonant nodes was .01kg. The slope of the graph was .7738 m?n, the y-intercept was .1014m, and the correlation coefficient was .9783. From the plot we were able to determine th at the plot is linear. The experimental fr! equency of the string vibrator was 72.70 1/s. The % shift was 17.4% The tension and mass needed to produce the first resonant mode was 7.79N and the linear relation used to determine the mass needed to produce the tenth resonant mode .0779NIf you compliments to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper